ip nat inside destination

This command defines a load-balancing configuration, where several LAN hosts are handling access requests from the WAN.

To remove the NAT configuration, use the no format of the command.

Syntax

ip nat inside destination <ip-addr> port <port-num> pool <pool-name>

Command	Description
ip-addr	Defines the global IP address (WAN side).
port-num	Defines the port number on the WAN IP address.
pool-name	Defines the LAN hosts pool, which must be configured with the "ip nat pool <pool-name> rotary" command.

Default

No NAT rules are defined.

Command Mode

Privileged User

Example

This example defines a NAT setup where a number of LAN hosts are handling requests to a single WAN port:

(config-data)# ip nat inside destination 212.36.145.5 port 8000 pool lanpool